ARAI HTC TEST FACILITY
Climatic Vehicle Test Cell(CVTC)
- Climatic Chamber and Low temperature soak room with temperature range from -30°C to 55°C
- Emission Testing for Vehicle up to 3.5 T GVW
- Capability for Type-VI Regulatory Test – Measurement of Cold CO and HC at -7°C
- For Solar Simulation with Radiation area: 7500 mm x 2500 mm
- Chassis Dynamometer with 220 kW Power, Inertia Simulation from 454 to 5448 Kg and Max speed 250km/h
- Data Acquisition and Complete Test Cell Automation
- Mileage Accumulation Chassis Dynamometer (MACD)
- Endurance Testing of 2WD and 4WD Vehicle
- Chassis Dyno with 220 kW Power, Inertia Simulation from 454 to 45448 Kg and Max Speed 250km/h
- Robot Driver for all Global Driving Cycles for Actuation of Gear, Throttle, Clutch, Brake and Ignition Key
- Automatic Refuelling system to handle liquid fuels like Petrol, Diesel, Ethanol, Methanol and various blends and Gaseous fuels like LPG, CNG and other alternate fuels
- Data Accumulation System with 33 Channel
Vehicle Test Cell (VTC 1)
- Domestic Certification for the current BS-III, BS-IV Emission Regulation and forthcoming BS-V, BS-VI Regulation
- Export Homologation Testing as per UNECE, EEC Directives and US EPA and Japanese Emission Regulations
- Emission Testing on Vehicles fueled with Liquid fuels such as Diesel, Petrol, Methanol, and their blends Gaseous fuel such as LPG, CNG and it blends with Hydrogen
- Chassis Dyno with 150kW Power and Inertia Simulation up to 5448 Kg and Max Speed 250Km/h
- Additional Dilution Tunnel for Gasoline Direct Injection Vehicles with PM and PN Measurement
- Test Cell Temperature: 25°C +/-5°C, Controllable within 25°C+/-1°C, Test Cell Humidity: 9+/-2 g of H2O / Kg dry air, soak room Temperature: Controlled within 23°C +/-2°C
- PM Conditioning Chamber with Microbalance having readability of 0.1 Mg and Temperature and Humidity Control
- Opacimeter for Smoke Measurement, Dynamic Fuel flow meter for measurement of continuous fuel flow
- Central Gas handling system for operating and calibration gases
W-VT SHED for Evaporative Determination
- Capacity to test the Gasoline and Ethanol fueled 3wh and 4wh vehicle as per Euro III and Euro VI Regulation
- Volume Compensation System: Movable roof with test volume range from 47 cu-m to 54.0 cu-m
- Temperature range: 10°C to 60°C, Controllability: +/-0.3°C
- SHED Chamber size: 6500mm(L)× 2600mm(W)×2500mm(H)
- Independent, sequential and Multiple Canister Loading bench with Auxillary Canister and scale for Breakthrough Test, having feature for Certification and Development Purpose
- Onboard Refuelling Vapour Recovery (ORVR)Test Facility
- Fuel Cart with adjustable fuel Conditioning
- Temperature Range: 10°C to 32°C
- Adjustable flow Rate:3-12 Gallons per Minute
